OWNER’S MANUAL & OPERATING INSTRUCTIONS 3 IN. (7.6 cm) Hose KIT MODEL NUMBER 100198 sAve THese INsTRuCTIoNs Important Safety Instructions are included in this manual. MADE IN CHINA REV 100198-20160929 12039 Smith Ave. Santa Fe Springs CA 90670 USA / 1-877-338-0999 www.championpowerequipment.
Have questions or need assistance? Do not return this product to the store! WE ARE HERE TO HELP! Visit our website: www.championpowerequipment.com for more info: • Product Info & Updates • Frequently Asked Questions • Tech Bulletins • Product Registration – or – Call our Customer Care Team Toll-Free at: 1-877-338-0999 WARNING: This product contains chemicals known to the State of California to cause cancer or birth defects and other reproductive harm. *We are always working to improve our products.
100198 3 IN. (7.6 cm) HOSE KIT Table of Contents Introduction. . . . . . . . . . . . . . . . Introduction. . . . . . . . . . . . . . Manual Conventions. . . . . . . . . . . Safety Rules. . . . . . . . . . . . . . . . Specifications. . . . . . . . . . . . . . . Parts Diagram. . . . . . . . . . . . . Parts List. . . . . . . . . . . . . . . . Operation. . . . . . . . . . . . . . . . . . Pump Location.
ENGLISH 100198 Introduction Introduction Congratulations on your purchase of a Champion Power Equipment product. Champion Power Equipment and Champion Engine Technology designs, builds, and supports all of our products to strict specifications and guidelines. With proper product knowledge, safe use, and regular maintenance, this product should bring years of satisfying service.
100198 ENGLISH Manual Conventions This manual uses the following symbols to help differentiate between different kinds of information. The safety symbol is used with a key word to alert you to potential hazards in operating and owning power equipment. Follow all safety messages to avoid or reduce the risk of serious injury or death. DANGER DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
ENGLISH 100198 SPECIFICATIONS Parts Diagram 1 2 5 3 3 6 7 4 8 9 # Part Number Description Qty # Part Number Description 1 9.1800.007 Inlet Hose, 20 ft. 1 6 203.250001.01 Hose Fitting Qty 2 2 9.1800.008 Outlet Hose, 25 ft. 1 7 221.250004.01 Strainer Adapter 1 3 2.06.041 Clamp(80-85), 3 in. 3 8 203.250003.03 Strainer 1 4 203.250005.02 Hose Adapter 2 9 9.1900.001 Teflon Tape 1 5 203.250002.
100198 ENGLISH Operation Pump Location Connecting a Hose Kit Place the pump in a well ventilated area. DO NOT place the pump near vents or intakes where exhaust fumes could be drawn into occupied or confined spaces. Carefully consider wind and air currents when positioning the pump. This pump must have at least 5 ft. (1.5 m) of clearance from combustible material. Leave at least 3 ft. (91.4 cm) of clearance on all sides of the pump to allow for adequate cooling, maintenance and servicing.
Operation Priming the Pump WARNING DO NOT run the pump dry. Running the pump dry can destroy the pump seals and will void the warranty. If the pump was running while dry, stop the engine and allow it to cool thoroughly before filling the chamber with water. Located on the outlet flange is the priming plug. Remove the priming plug and fill pump body to the very top of outlet flange with water. Reinstall the priming plug. As the engine starts up, this will start the draw of liquid into the pump.
WARRANTY WARRANTY CHAMPION POWER EQUIPMENT 1 YEAR LIMITED WARRANTY Warranty Qualifications Champion Power Equipment (CPE) will register this warranty upon receipt of your Warranty Registration Card and a copy of your sales receipt from one of CPE’s retail locations as proof of purchase. Please submit your warranty registration and your proof of purchase within ten (10) days of the date of purchase.
