User Guide

CTM-110/120 Installation & Operation Manual
Page 18
1702-0037 Rev 3.2
8.5 Chameleon Controller Software Features
The Chameleon Controller Software provides a number of features to configure the modem and
the Windows operating system ready for connecting to the Internet using the Telus 1x network.
It also provides utilities to assist with modem operating configuration and diagnostics.
These features are all accessed from the Chameleon Controller Software application.
8.5.1 Make a new network connection
From the Tools menu select Connection Settings:
Click on Add and follow the
instructions to make a new network
connection:
For a TELUS Mobility 1x connection
the telephone number is #777.
For a TELUS Mobility qnc
connection the telephone number is
#888.
When the new connection has been
setup, enter the user name and
password for this modem and
connection:
For a 1x connection the user name
will be
Phone [e-mail]
and the password will be the ESN as
given on the base of the modem:
099xxxxxxxx
For a qnc connection the user name
will be qnc and the password will be
qnc.
Select Save User Name and Password if you wish these to be remembered by the software for
future use.
To make this your current connection make sure it is selected from the list if there are more than
one connection. Save the connection settings by clicking on OK.