User Guide

CTM-110/120 Installation & Operation Manual
Page 13
1702-0037 Rev 3.2
7.1 STEP 1 - Installing the Chameleon Controller Software
The Chameleon Controller Software is designed for operation with Windows XP, and
2000. It provides tools to configure the CTM-110/120 modem and to setup connections
to the cellular network. For the CTM-120 modem with GPS it also provides an
application to enable the GPS data to be routed to a virtual serial COM port on the local
computer so that the position data is available to a mapping application.
To install the Chameleon Controller Software run the file CDstartup.exe from the CD-
ROM. This will invoke the installation wizard:
Select English or French as
the preferred language.
Follow the installation
instructions that appear on the
screen.
At the end of the installation you will be prompted to install the Cypress Solutions
Chameleon modem by following the instructions below for your specific Windows
operating system.
7.2 STEP 2 - Installing the Windows® .inf file
For installations where the CTM-110/120 is to be operated with computers running a
Windows XP or 2000 release operating system it is necessary to install an information
file (.inf) in order that the operating system can successfully find and interface with the
modem. The procedure for each of these operating systems is slightly different.
7 Software Installation