Pre-Delivery/Install Checklist

ManualsBrandsChamberlain ManualsDoors & WindowsChamberlain Wall Mounted Ultra-Quiet Garage Door Opener

PRE-PURCHASE CHECKLIST

Chamberlain

Wall Mount Garage Opener

POWER

 An electric outlet must be accessible within a 6-foot (1.83 m) diameter

of the installation area for the opener. The outlet must be 120 VAC/60 Hz

ONLY. Contact a qualiﬁed electrician if you need an outlet installed.

SECTIONAL GARAGE DOOR

 Standard sectional door up to 14 feet (4.3 m) high.

 Sectional high-lift door (up to 54 inches [137.2 cm] of high lift).

 Doors up to 18 ft. (5.5 m) wide.

 Doors up to 180 sq. ft. (16.7 sq. m).

 Any gap between the ﬂoor and the bottom of the door must not exceed

1/4 inch (6 mm). Otherwise, the safety reversal system may not work properly.

DRUMS AND PREVIOUS OPENER

 Drums have a diameter of 4–6 inches (10–15 cm).

 3- to 3.9-inch (7.6 cm to 9.9 cm) drums may be used on doors up to 430 lbs.

(195.4 kg).

 Previously installed garage door opener has been removed completely.

TORSION BAR AND TORSION SPRINGS

 Torsion bar is 1 inch (2.5 cm) in diameter.

 Torsion bar must extend at least 1-1/2 inches (3.81 cm) past the bearing plate

and be free of damage.

 Distance between ceiling and center of torsion bar is 3 inches (7.6 cm) or more.

 Distance between garage wall that the torsion bar is mounted on and center of

torsion bar is 2-1/2 inches (6.4 cm) or more.

 A minimum of 8.5 inches (21.6 cm) between the side garage wall (or obstruction)

and the end of the torsion bar.

ALL the requirements above MUST be met. If your door does not meet these criteria,

you must install a different model of opener. If your torsion bar, power source and/

or drums do not meet the requirements, contact a trained door systems technician.

READ FIRST

The unique space-saving design of the Chamberlain Wall Mount Garage

Opener makes it a smart solution for most garages, but it does require several

speciﬁ c garage features for safe installation and operation. Before purchasing,

please check your garage for the following:

IMPORTANT! If you DO NOT meet all the requirements, contact a trained door systems technician.

PRE-PURCHASE CHECKLIST

Chamberlain

Wall Mount Garage Opener

Add two 100-watt-max. NON-HALOGEN

or 26-watt-max. CFL light bulbs to brighten

your entire garage (sold separately).

To reduce the risk of injury to persons, ONLY enable Timer-to-Close and myQ®

remote operation features when operator is installed on a sectional door.

WARNING

CHAMBERLAIN.COM

Summary of content (2 pages)

PAGE 1
PRE-PURCHASE CHECKLIST Chamberlain® Wall Mount Garage Opener READ FIRST The unique space-saving design of the Chamberlain Wall Mount Garage Opener makes it a smart solution for most garages, but it does require several speciﬁc garage features for safe installation and operation. Before purchasing, please check your garage for the following: IMPORTANT! If you DO NOT meet all the requirements, contact a trained door systems technician. POWER  An electric outlet must be accessible within a 6-foot (1.
PAGE 2
PRE-PURCHASE CHECKLIST Chamberlain® Wall Mount Garage Opener GLOSSARY Term Deﬁnition Bearing Plate Acts as a support for the torsion bar. The bearing plate is typically located above the garage door. Cable Tension Monitor The cable tension monitor detects any slack in the garage door cables. Failure to properly install the cable tension monitor may cause the cables to be thrown and may result in a hazardous situation.