MULTI-FUNCTION JUMP STARTER MODEL CA1000 www.chamberlain.com The Chamberlain Group, Inc.
INTRODUCTION Thank you for purchasing the Chamberlain Multi-Function Jump Starter. Backed by Chamberlain’s commitment to quality and innovation, you now have the security of knowing you won’t be left stranded if your vehicle won’t start because of a dead battery. In addition, the Chamberlain Multi-Function Jump Starter can be used every day to charge or power your mobile electronics. Visit www.chamberlain.
IMPORTANT OPERATION INSTRUCTIONS WARNING To reduce the risk of SEVERE INJURY or PROPERTY DAMAGE: Usage Warnings 1. DO NOT plug the jumper cables into the Jump Starter prior to attaching to the 2. vehicle battery terminals. 2. DO NOT touch the red and black jumper clamps together Battery Warnings or connect both to the same 1. RISK OF EXPLOSIVE GASES: piece of metal to prevent • Car batteries can generate physical injury or damage explosive gases during to the vehicle or the Jump normal battery operation.
OPERATION AND FEATURES CHARGING THE JUMP STARTER 1. Connect 12V car charger or the wall charger to the charging input for the Jump Starter. 2. Slide the On/Off switch to the ‘On’ position. The LCD display will light up and begin to flash, indicating normal charging has begun. The LCD display says “IN” while charging. 3. The Jump Starter will be fully charged in 2 – 3 hours and the LCD display will show 100%. 4. Slide the On/Off switch to the ‘Off’ position and disconnect the 12V car charger.
JUMPSTARTING A VEHICLE To reduce the risk SEVERE INJURY or PROPERTY DAMAGE: • Attach jumper cables to a battery and vehicle chassis as indicated below. Jump Starter is intended for a NEGATIVELY GROUNDED vehicle. • DO NOT touch the red and black jumper clamps together. • Keep jumper cables away from moving engine parts. • Stay clear of fan blades, belts, pulleys, and other parts that can cause injury to persons. • Check polarity of battery posts. Positive is red, and negative is black.
CHARGING A MOBILE DEVICE: T 1. Connect a mobile device cable to the appropriate USB port on the Jump Starter. Consult your mobile device’s manufacturer for proper charging power specifications. 2. Slide the On/Off switch to the ‘On’ position. Press and release the Function button to begin charging. 3. Time required to achieve a full charge varies based on the size of the battery in the mobile device and the USB charging port used.
TROUBLESHOOTING The Jump Starter will not turn on. Charge the Jump Starter. The Jump Starter will not charge. Make sure to use the 12V car charger or wall charger provided. The LCD display says “IN” when it is charging the Jump Starter. The Jump Starter will turn on, but will not jump start my vehicle. Slide the On/Off switch to the ‘On’ position. Press and release the Function button. Verify the charge level of the Jump Starter is at least 40%.
© The Chamberlain Group, Inc.
