Installation Instructions

35
Operation
Multi-Function Control Panel (continued)
LOCK
The LOCK feature is designed to prevent activation ofthe garage door opener from remote controls
while still allowing activation from the door control and keylessentry.Thisfeature is useful for added
peace of mind when the home is empty(i.e. vacation).
l Activate: Press and hold the LOCK button for 2 seconds.The command LED will flash as
long asthe lock feature is activated and your handheld remote control will not operate your
door atthistime.
l Deactivate: Press and hold the LOCK button again for 2 seconds. The command LEDwill
stop flashing and normal operation will resume.
PROGRAM
Any compatible remote controls,wireless keyless entry,or MyQ
®
accessoriescan be programmed to
the garage door opener by pressing the Learn button.
Push Bar
LIGHT Button
LOCK Button
Command LED
LEARN Button
Using the Push Button Door Control
SYNCHRONIZE THE DOOR CONTROL: To synchronize the door control to the garage door opener,
press the push button until the garage door opener activates (itmay take up to 3 presses).
Push Button