Installation Instructions

Additional Items You May Need:

Survey your garage area to see if you will need anyofthe following items:

n (2) 2X4 PIECES OF WOOD

Maybe used to fasten the header bracket to the structural supports.Also used to position the

garage door opener during installation and for testing the safetyreversing sensors.

n SUPPORT BRACKET AND FASTENING HARDWARE

Must be used ifyou have a finished ceiling in your garage.

n EXTENSION BRACKETS (MODEL 041A5281-1) OR WOOD BLOCKS

Depending upon garage construction,extension brackets or wood blocksmaybe needed to

install the safety reversing sensor.

n FASTENING HARDWARE

Alternate floor mounting ofthe safety reversing sensor will require hardware not provided.

n DOOR REINFORCEMENT

Required ifyou have a lightweightsteel,aluminum,fiberglass or glasspanel door.

n RAIL EXTENSION KIT

Required ifyour garage door is more than 7 feet (2.13 m) high.

Tools Needed

3/16

7/16

1/2

5/32

5/16

5/8

9/16

1/4

7/16

Preparation