Instructions / Assembly

35
Operation
Multi-Function Control Panel (continued)
LOCK
The LOCK feature is designed to prevent activation ofthe garage door opener fromremote controls
while still allowing activation from the door control and keyless entry. Thisfeature is useful for added
peace of mind when the home is empty (i.e.vacation).
l Activate: Press and hold the LOCK button for 2 seconds. The command LEDwill flash as
long asthe lock feature is activated and your handheld remote control will notoperate your
door at thistime.
l Deactivate: Press and hold the LOCK button again for 2 seconds. The command LEDwill
stop flashing and normal operation will resume.
PROGRAM
Any compatible remote controls, wirelesskeyless entry, or MyQ
®
accessoriescan be programmed to
the garage door opener by pressing the Learn button.
Push Bar
LIGHT Button
LOCK Button
Command LED
LEARN Button
Remote Control and Keyless Entry*
Pre-programmed remote control included, no need to program the remote.
To add or reprograma remote control,follow the instructions below. Older Chamberlain remote
controlsare NOT compatible, see page 41 for compatible accessories.
PROGRAM USING THE DOOR CONTROL
1. Press the LEARN button on the door control to enter Programming Mode.
2. Press the LEARN button again, the LEDwill flash once.
3. Remote Control: Press the button on the remote control that you wish to operate your garage
door.
Keyless Entry: Enter a 4-digitpersonal identification number (PIN) of your choice on the
keylessentry keypad.Then press the ENTERbutton.
The garage door opener lights will flash (or two clicks will be heard) when the code hasbeen
programmed.
The command LED
will flash once.
The command LED will
flash once again.
1
2
OR
PIN
? ? ? ?
3
* Not included with all models.