Instructions / Assembly
Table Of Contents
- ENGLISH
- Easy step-by-stepinteractive 3D instructions
- Installation Manual
- Contents
- Safety Symbol and Signal Word Review
- Preparation
- Assembly
- Installation
- STEP 1 Determine the Header Bracket Location
- STEP 2 Install the Header Bracket
- STEP 3 Attach the Rail to the Header Bracket
- STEP 4 Position the Garage Door Opener
- STEP 5 Hang the Garage Door Opener
- STEP 6 Install the Light Bulbs
- STEP 7 Attach the Emergency Release Rope and Handle
- STEP 8 Install the Door Bracket
- STEP 9 Connect the Door Arm to the Trolley
- STEP 10 Install the Door Control
- STEP 11 Wire the Door Control to the Garage Door Opener
- STEP 12 Attach the Warning Labels
- STEP 13 Install the Protector System®
- STEP 14 Wire the Safety Reversing Sensors
- STEP 15 Connect Power
- STEP 16 Align the Safety Reversing Sensors
- Adjustments
- Battery Backup
- myQ® App Control
- Operation
- Maintenance
- Troubleshooting
- Warranty
- Repair Parts
40
Operation
MULTI-FUNCTION CONTROL PANEL
Command LED
LIGHT Button
LEARN Button
LOCK Button
Push Bar
SYNCHRONIZE THE DOOR CONTROL: To synchronize the door control
to the garage door opener, press the push bar until the garage door
opener activates (it may take up to 3 presses). Test the door control by
pressing the push bar; each press of the push bar will activate the
garage door opener.
PUSH BAR: Press the push bar to open or close the door.
LEARN BUTTON: Use to program compatible remote controls, wireless
keyless entries and myQ
®
devices to the garage door opener.
LOCK: Prevents remote controls from working, while still allowing
activation from the door control and keyless entry. (Factory setting is
OFF.)
Turn ON:
Press and hold the LOCK button for 2 seconds. The command LED will
flash as long as the lock feature is on.
Turn OFF:
Press and hold the LOCK button for 2 seconds. The command LED will
stop flashing and normal operation will resume.
PUSH BUTTON DOOR CONTROL
Push Button
LIGHT Button
SYNCHRONIZE THE DOOR CONTROL: To synchronize the door control
to the garage door opener, press the push button until the garage door
opener activates (it may take up to 3 presses).
PUSH BUTTON: Press the button to open or close the door.
LIGHT/LEARN BUTTON: Press the LIGHT button to turn the garage
door opener lights on or off. When the lights are turned on they will
stay on until the LIGHT button is pressed again, or until the garage door
opener is activated. Once the garage door opener is activated the lights
will turn off after the specified period of time (the factory setting is 4-
1/2 minutes). The LIGHT button will not control the lights when the door
is in motion.