User Manual
Table Of Contents
- Owner’s Manual B1381
- Preparation
- Assembly
- Installation
- STEP 1 Determine the header bracket location
- STEP 2 Install the header bracket
- STEP 3 Attach the rail to the header bracket
- STEP 4 Position the garage door opener
- STEP 5 Hang the garage door opener
- STEP 6 Attach the emergency release rope and handle
- STEP 7 Install the door bracket
- STEP 8 Connect the door arm to the trolley
- STEP 9 Install the door control
- STEP 10 Wire the door control to the garage door opener
- STEP 11 Attach the warning labels
- STEP 12 Install the Protector System®
- STEP 13 Wire the Safety Reversing Sensors
- STEP 14 Connect power
- STEP 15 Aligning the safety reversing sensors
- STEP 16 Ensure the door control is wired correctly
- Adjustments
- Battery Backup
- MyQ® Smartphone Control
- Operation
- Maintenance
- Troubleshooting
- Accessories
- Warranty
- Contact Information
- Repair Parts
- Spanish
43
Repair Parts
Rail Assembly Parts Installation Parts
2
4
6
1
3
5
7
8
NOTICE
1
3
4
2
5
6
7
8
9
10
11
Description Part Number
1 Belt 041A5250
2 Pulley K144C0054
3 Master Link 004A1008
4 Rail 041A5665
5 Trolley Assembly
Includes: Threaded
Shaft (1), Clevis Pin (1),
and Ring (1)
041C5141-2
6 “U” Bracket 041D0598-1
7 D-Shape Threaded Shaft 041A6689
8 Spring Trolley Nut 041B4103
Not Shown
Wear Pads 183A163
Hardware Bag 041A7920-2
Description Part Number
1 Curved Door Arm 041B0035B
2 Door Bracket with Clevis
Pin and Fastener
041A5047-1
3 Emergency Release Rope
and Handle
041A2828
4 Header Bracket with
Clevis Pin and Fastener
041A5047-2
5 Remote Control
Visor Clip
K029B0137
6 Safety Sensor Bracket 041A5266-3
7 Safety Sensor Kit
Receiving and sending
sensors with wire
041A5034
8 Straight Door Arm 4178B0034B
9 White and Red/White Wire 041B4494-1
10 3V CR2032 Lithium
Battery
K010A0020
11 Hanging Brackets 012B0076
Not Shown
Owner’s Manual 114A5148