User Guide

Chamberlain’s Leather Milk
Recipes No.1, No.2, No.3, No.4, No.5
How Much Do I Need?
There’s one thing in common with all of our Leather Milk products, a little goes a long way, so
you probably don’t need as much as you think. While it certainly depends on the age, condition
and type of leather, there's only so much product leather can absorb. If too much is applied at
once, it clogs up the pores going down, and the rest forms a sticky residue on the outside. Even
with careful application, too much can be used. If your leather stops absorbing one of our
Leather Milk products and becomes “tacky” then you know you’ve gone too far. Apply No.1, No.
3, No. 4 and No. 5 in THIN, EVEN layers across the entire surface of your leather item. Apply
additional layers as needed. Applying the recipes in this way reduces the risk of
over-conditioning and makes sure any change in color is uniform. Apply No. 2 generously into
7 | Page