User's Manual

To reduce the risk of SEVERE INJURY to persons:
• DO NOT enable the MyQ Home Bridge if operating either one-piece or swinging
doors. To be enabled ONLY on a sectional door.
Read instructions thoroughly BEFORE beginning.
If using this product with residential door openers, this product
must be used only with door openers manufactured after 1993
that utilize photoelectric sensors. The photoelectric sensors are
always located on or near the bottom of the door track.
This device complies with Part 15 of the FCC rules and IC RSS-210. Operation
is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Communication between iPhone, iPad, or iPod touch and the HomeKit-enabled MyQ
®
device is secured by HomeKit technology and Security+ 2.0
®
.
Controlling this HomeKit-enabled accessory automatically and away from home
requires anApple TV with tvOS 10.0 or later or an iPad with iOS 10.0 or laterset up
as a home hub.
NOTICE: This device complies with part 15 of the FCC rules and Industry Canada’s
license-exempt RSSs. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device must be installed to ensure a minimum 20 cm (8 in.) distance is
maintained between users/bystanders and device.