User Manual

9
1. Attach the goose-neck gasket (provided) if mounting to a goose-neck.
2. Mount the controller securely to a fl at surface or pedestal with
appropriate hardware taking care to route wiring through appropriate
knockouts. NOTE: Ensure the cover can fully open to allow access after
the installation is complete.
Mount Controller
2
DO
Make sure the controller is properly sealed
to prevent damage to the controller from
moisture.
PRE-INSTALL NETWORK PROGRAMMINGINSTALL ACCESS CONTROLINTRODUCTION
Pedestal Mount
1/4" x 1-1/2" Ribbed Neck
Security Bolt (4)
Goose-neck
Gasket
Surface Mount
Flush Mount
Flush Mount
Wi-Fi
®
Antenna
Radio Antenna
IMPORTANT: For fl ush
mount applications it may
be necessary to mount
the antennas remotely.
Optional antenna cable
kits are available for
remote antenna mounting
(refer to accessories).
Make sure you run the
cables for the remote
antennas before
mounting the controller.