User Manual

ManualsBrandsChamberlain Group ManualsElectronicsACXL Operator

PRE-INSTALL NETWORK PROGRAMMINGINSTALL ACCESS CONTROLINTRODUCTION

1Create a Facility

1. On the left navigation bar, click

Facilities, and click Add facility.

2. Enter the following information:

• Facility name

• Directory code length

(required ﬁ eld)

• Address

• City/town

• State

• Zip code

• Country (required ﬁ eld)

• Time zone (required ﬁ eld)

• Contact information- This

is required. The contact

is typically the property

manager

3. Click Save.

3 Add Door(s)

NOTE: Door 1 is automatically

created and associated to the Door

1 relay. This step is to conﬁ gure

Relay 2.

1. On the left navigation bar, click

Facilities or Dashboard.

2. Select the facility.

3. Click on the Controllers tab

and select the controller you

want to add the door to.

4. Click on the Doors tab next to

the Controller Settings.

5. Select Relay 2 to control the

door.

6. Click Add Door.

7. Enter the name of the door.

8. Click Save and Close.

2 Add New Controller(s)

The Control Panel # is required to

add a controller to a facility. The

Control Panel # is located on the

product label.

1. On the left navigation bar, click

Facilities or Dashboard.

2. Select the name of the facility

where the new controller will be

added.

3. Click on the Controllers tab.

4. Click Add New Controller.

5. Enter the Control Panel # (CP#)

and the name of the controller.

6. Click Save. The Controller will

appear on the list, a browser

refresh may be necessary.

4 Add Schedule(s)

1. On the left navigation bar, click

Schedules.

2. Select the name of the facility.

3. Click Add Schedule and enter

schedule information:

• Name of schedule

• Description of schedule

• Do not select an Enabling

Group unless you want a

member of the enabled group

to activate the schedule

when they enter their entry

code. NOTE: The schedule

is not applied or activated

until a member of the group

accesses the property using a

credential or pin.

4. To select a range of hours and

days, click on the hour and day

and drag to create the schedule

or you may click on individual

hours and days.

5. Add holidays and exceptions.

6. Click Save.

5 Create Group(s)

1. On the left navigation bar, click

Groups.

2. Select the facility you are

creating a group for.

3. Click Add Group.

4. Enter a name for the new

group.

5. Select the Status (active or

suspended).

6. Click People and click Add

users+.

7. Select the people for the group

by clicking on the + next to the

name of the person.

8. Add the zones for this group

by, click Zones and click Add

Zones+.

9. Select the zones by clicking on

the + next to the name of zone.

10. Click Save.

7 Add a Credential

1. On the left navigation bar, click Credentials.

2. Select the facility.

3. Click Add credential.

4. Select the Type: Card or transmitter.

5. Select the Format: Standard 26 bit or 30-Bit Wiegand.

6. Enter the card or transmitter information:

• Card number

• Offset

• Facility code

• Vendor code (30-Bit Wiegand ONLY)

7. Click Save.

NOTE: If adding multiple credentials, click Bulk load, enter the ﬁ rst and last number in the series, the offset of the ﬁ rst

card, and the facility code.

8 Add People

1. On the left navigation bar, click

People.

2. Select the facility.

3. Click Add Person.

4. From the Proﬁ le tab, Personal,

enter the following information:

• Email (optional)

• First and last name

• Role (use -- in most cases)

5. In Contact, select the Do not

disturb schedule check box if

desired.

6. In Contact, enter the following

information:

• Phone numbers

• Address, city, state, and zip

code

7. Click, Save.

8. Click the Vehicle Information

tab, enter vehicle information if

desired.

9. Click Add a new vehicle.

10. Enter the vehicle information:

• Year

• Make

• Model

• State

• License plate number

• Color

11. Click Add vehicle to add another

vehicle to the person’s proﬁ le.

12. Click, Save.

13. Setup Facility Access. If the

person is to be called by the

system you will need to set up the

Facility Access Directory.

a. From the add people screen,

click the Facility Access tab.

b. Enter the directory information,

click Verify. If you want the

system to automatically

assign a directory code, click

Generate Code.

c. Enter a PIN, click Verify.

If you want the system to

automatically assign a PIN,

click Generate PIN. Select

Credentials for this person by

clicking in the blank space in

the Cards/Transmitters ﬁ eld

and select one a credential.

14. Set Access

a. If you want to set activation

and expiration dates, click the

Calendar icon for activation,

select the date for activation.

Click the Calendar icon for

expiration, select the date you

want their access to expire.

b. Select the Groups(s) for this

person, click in the blank

space in the Access Groups

ﬁ eld.

15. Click Save.

6 Create Zone(s)

1. On the left navigation bar,

click Facilities or Dashboard.

2. Select the facility.

3. Click on the Zones tab.

4. Click Add New Zone.

5. Enter name of the zone.

6. Click Doors.

7. Click Add doors+ and click on

the + next to the name of the

door.

8. Click on Groups.

9. Click on Add Groups+ and

select the Groups for the new

zone.

10. Select the schedule from the

drop-down list.

11. Click Save.