CHAMBERLAIN’ Advanced Garage oo Door Monitor Model AGGRIEVE 08 £29. prevent possible SERIOUS INJURY or DEATH from a closing garage door: + NEVER permit children to operate or play with door control push buttons or remote control transmitters. « Activate door ONLY when it is properly adjusted and there are no obstructions to door travel. « This door monitor works with an operator system equipped with an unattended operation feature. The door could move unexpectedly.
Features (Continued) LED INDICATORS LED MEANING Red Green Blinking oft At least one garage door is closed Off Solid ALL doors are closed Solid Of No signal has been received from a programmed garage door opener within the last 20 minutes (implies a power outage or a garage door opener malfunction) Solid Solid The advanced garage door monitor has been successfully programmed Red and green LED blink simultaneously The garage door{s} is closing after pressing the Close Door button Red and green LED blink alter
Setup & Programming LEARN SETUP Connect the adapter to the advanced garage door monitor and a standard 110 Vac outlet. PROGRAMMING 1. Press and release the Learn button on the advanced garage door monitor. 2, Within 60 seconds, press and release the Learn button on the garage door opener. Two short beeps, confirms that the advanced door monitor has been successfully programmed. NOTE: To program additional garage door openers, repeat the steps above on each individual garage door opener.
