User's Manual

PROGRAM THE WI-FI HUB TO THE GARAGE DOOR OPENER

1. While the blue LED on the Wi-Fi hub is blinking, press and release the

BUTTON

(Settings), the Blue LED will turn on.

2. Press and hold the BUTTON on the Wi-Fi hub until the green and yellow LEDs

alternate blinking.

3. While the green and yellow LEDs alternate blinking on the Wi-Fi hub, press and release

the

BUTTON on the Wi-Fi hub. The yellow LED on the Wi-Fi hub will turn on.

4. Press BUTTON 1 on the Wi-Fi hub the number of times indicated in the chart below:

NUMBER OF PRESSES RF (IN MHZ) BRAND

1 310, 315, and 390 LiftMaster

with Yellow LEARN button

2 315 LiftMaster

with Purple LEARN button

3 390 LiftMaster

with Orange LEARN button

4 390 LiftMaster

with Green LEARN button

5 315 Genie

/Overhead Door

Intellicode

6 390 Genie

/Overhead Door

Intellicode

7 318 Linear

Mega Code

8 310 Stanley

Secure Code

9 372.5 Wayne Dalton

Keeloq

5. Press the

BUTTON on the Wi-Fi hub.

6. Press and release the LEARN button on the garage door opener.

NOTE: Visit www.myliftmaster.com for Genie Intellicode II instructions.

7. While the green and yellow LEDs alternate blinking on the Wi-Fi hub, press and release

BUTTON 1 on the Wi-Fi hub to program to the garage door opener.

8. Press and release BUTTON 1 on the Wi-Fi hub to activate the garage door opener. If the

garage door opener does not activate, repeat steps 3-8.

9. To exit programming mode, press and hold the BUTTON on the Wi-Fi hub until the

blue LED blinks.

Programming

Wi-Fi Hub

BUTTON (Settings)

BUTTON 1

BUTTON 2