User's Manual

4
1
WIRE RECEIVER
1. Find the operator diagram on pages 12-18 to see the mounting location for the receiver and wire routing.
2. Open the receiver housing.
3. Route the wire harness from the receiver to the operator control board. Connect the wire harness to the “EXP. BOARD”
terminal on the control board or to the expansion board (if installed) using the provided I
2
C dongle. Connect the dongle to
the “TO MAIN BOARD” terminal on the expansion board.
The blue power LED will come on.
WIRE RECEIVER
1. Find the operator diagram on pages 12-18 to see the mounting location for the receiver and wire routing.
2. Open the receiver housing.
3. Route the wire harness from the receiver to the operator control board. Connect the wire harness to the “EXP. BOARD”
terminal on the control board or to the expansion board (if installed) using the provided I
2
C dongle. Connect the dongle to
the “TO MAIN BOARD” terminal on the expansion board.
The blue power LED will come on.
WIRE RECEIVER
1. Find the operator diagram on pages 12-18 to see the mounting location for the receiver and wire routing.
2. Open the receiver housing.
3. Route the wire harness from the receiver to the operator control board. Connect the wire harness to the “EXP. BOARD”
terminal on the control board or to the expansion board (if installed) using the provided I
2
C dongle. Connect the dongle to
the “TO MAIN BOARD” terminal on the expansion board.
The blue power LED will come on.
Illustrations in manual are for reference only, your application may look different
Les illustrations dans le manuel sont fournies à titre de référence uniquement; votre application peut avoir une autre apparence.
Las ilustraciones del manual se ofrecen únicamente como referencia, su instalación podría ser diferente.
Expansion Board
Tableau d’extension
Tarjeta de expansión
2
3
Control Board
Tableau de commande
Tarjeta de control
OR
OU
O
To Main Control Board
To Main Control Board
To Main Control Board
I
2
C Dongle
I
2
C Dongle
I
2
C Dongle
Review Copy