Installation Guide

Preparation & Safety
Installer Agreement
What's In the Box
What's In the Door
Wire the Control Panel
Check Power
Set for Programming
Test Operation
Troubleshooting
LED Status
Diagnostics
Repair Parts
Notices
For More Help
See How-To video
To reduce the risk of SEVERE INJURY or
DEATH:
• Read all the instructions before using
the myQ® Pet Portal (appliance).
•
To reduce the risk of injury, close
supervision is necessary when an
appliance is used near children.
•
Do not contact moving parts.
• Only use attachments recommended or
sold by myQ®.
Unit will be installed to meet national and
local jurisdiction codes.
To protect against injury:
• Open the pet door, and then disconnect
from power BEFORE installing or
servicing the myQ® Pet Portal.
• Follow local jurisdictional code and
obtain a permit as required.
•
DO NOT replace an interior
garage access door with the
myQ® Pet Portal.
.
Preparation
Safety Symbol and Signal
Word Review
When you see these Safety Symbols and Signal
Words on the following pages, they will alert you
to the possibility of serious injury or death if you
do not comply with the warnings that accompany
them. The hazard may come from something
mechanical or from electric shock. Read the
warnings carefully.
When you see this Signal Word on the following
pages, it will alert you to the possibility of damage
to your property or product if you do not comply
with the cautionary statements that accompany it.
Read them carefully.
MECHANICAL
ELECTRICAL
Pet Portal
Door Installation Guide
WARNING: This product can expose you to chemicals including lead, which
are known to the State of California to cause cancer or birth defects or other
reproductive harm. For more information go to www.P65Warnings.ca.gov.
IMPORTANT INSTALLATION INSTRUCTIONS
myQ® Pet Portal
Gen1 Model MyQ®PP1