Installation Instructions

Part No. 14169
Rev. May 2013
Page 2 of 12
1. Read all instructions carefully before you begin.
2. Check package contents and hardware box(es).
3. Ensure you have necessary tools required to complete installation.
NOTE: On Full Lite doors, the screen insert is secured to the inside of the door with two temporary
4” retainer strips. Before installing the door, discard the 4” strips and set the screen aside.
Storm door, complete with glass insert(s), screen system
Hardware kit(s) includes:
Handle assembly
Closer assembly
Mounting frame kit includes:
Hinge mounting frame
Latch mounting frame
Header mounting frame
Expander sweep system
Mounting frame screw covers (Century, Premier - available as an accessory for other series)
Installation screw package
From the product code label attached to the door’s top mainframe, record the following information for warranty
purposes.
Date of Purchase:
Door Name:
Door Color:
Door Size:
Model #:
Serial #:
BEFORE YOU BEGIN
CHECK CONTENTS OF STORM DOOR PACKAGE
TOOLS REQUIRED FOR INSTALLATION
DOOR INFORMATON
Carpenter’s level
Hacksaw
Phillips screwdriver
Slot screwdriver
File
Tape measure
Hammer
Center punch
Pliers
7/16” drill bit
1/4” drill bit
1/8” drill bit
Pencil
Drill