Installation Instructions

Part No. 14169
Rev. May 2013
Page 12 of 12
Your door may have the screen system positioned in the top or bottom half of the door. Follow instructions that
match your screen position.
• Screen in Top of Door - Includes View And Vent™
OPENING INSERT: In the closed position the bottom of the sliding glass insert interlocks with the crossbar.
To open insert for ventilation, follow the 3 steps in the pictures
Depress latches and push
glass insert upwards.
Slightly pull the glass insert to-
wards you to clear the crossbar.
Lower the glass insert to the desired posi-
tion for ventilation.
Ensure latches lock into the channel
holes before releasing the handle rail.
CLOSING INSERT: To close insert and set the interlock, follow the 3 steps in the pictures.
Depress latches and push
glass insert all the way to
the top.
Push the glass insert towards the
outside.
Lower the glass insert so it rests
on the crossbar. This engages the
interlock system.
• Screen in Bottom of Door
1. To raise sliding glass insert, hold handle rail, depress both latches at bottom corners of insert and lift into position.
2. Ensure latches release into precut holes in the channel.
3. To close insert, hold handle rail, depress latches and lower to bottom of window opening.
HOW TO OPEN / CLOSE SLIDING GLASS INSERT FOR VENTILATION