Parts List
14
Customer Helpline 01904 727508
www.coreservice.co.uk
Fit nylon line
Clean and storage
Maintenance and storage
Take approximately 4m of line. Insert line into the spool holes and wind line in the direction of the
arrows on the top of spool.
Your trimmer is designed to use only line with a maximum diameter of 1.2mm.
Important! Leave approximately 100mm of line unwound and place into cleat.
Care should be taken to ensure that the line is neatly coiled on the spool. Failure to do so will
impair the efciency of the automatic line feed.
Then t the spool cap in exchange the spool part.
1. Never use water or chemical cleaners to clean your power tool. Wipe clean with a dry cloth.
2. Always check the cutting head and guard before each use.
3. Always store your power tool in a dry place.
4. Keep the motor ventilation slots clean.
5. Have the unit professionally repaired should any damage parts.
Note! For your convenience it is recommended you buy spool and line complete.