Parts List

18
Customer Helpline 01904 727508
www.coreservice.co.uk
Maintenance and Storage
Replace the spool
Option 2: replacing line
Clean and storage
To test if the line is advancing properly, push the button with your thumbs while pulling the wire
with your ngers. The line should advance freely.
Attention! Please use diameter 1.2mm or 1.4mm line.
Line for your trimmer is available at extra cost from your local dealer or the customer support
service:
1. Insert one end of the line into the hole in the spool about 3 mm.
2. Thight and evenly wind the line onto the spool in the direction of the arrow on the spool, until
the line builds up to the notches in the spool rim. Do not overll spool. The spool holds about
6.5 m of line.
1. After use, remove the battery pack from the trimmer;
2. When not in use store the machine out of the reach of children;
3. Use only manufacturer recommended replacement parts and accessories;
4. To clean the tool, remove battery pack and use only mild soap and a damp cloth to clean the
tool. Do not immerse tool in water or squirt it with a hose. Do not allow any liquid to get inside
it. Do not clean with a pressure washer.