Parts List

Customer Helpline 01904 727508

www.coreservice.co.uk

Switching the trimmer on:

Press and hold the safety lock-off button (C) and then press the

trigger (D) on the handle.

Release the safety lock-off button (C) again.

Switching the trimmer off:

Release the trigger (D) on the handle.

Operation

Switch on/ off

Setting the cutting angle

Telescopic handle

The angle of the handle can be set to 4 different working positions.

Push the cutting angle adjustment button (12) with one hand and

move the handle up and down to the desired position. Release the

button to lock the handle in the set position.

1. Set the cutting angle to 0 degree (see instructions below).

2. Press the edging button (F), rotate the lower tube 90 degree(J).

Turn the telescopic knob (A) aligning the “UNLOCK” direction and

extend upper part of handle to desired handle length. Then turn

the telescopic knob (E) aligning the “LOCK” direction and tighten.

Edging function