Parts List

14
Customer Helpline 01904 727508
www.coreservice.co.uk
Operation
Starting
Before starting the grass trimmer for the rst time, check that the nylon lines touch or pass over
the wire cutting blade. If they are not long enough:
1. Take off the battery pack from machine.
2. Press the spool button
3. Pull more nylon wire to lengthen.
Press
Install the battery pack. Switch the trimmer on. Press and hold the safety lock-off button (C) and
then press the trigger (D) on the handle. Release the safety lock-off button (C).
c
D
The lengthened nylon line will be cut to size automatically by the wire cutting blade once the grass
trimmer is turned on.
During use, the nylon line will become shortened or worn. To automatically lengthen or advance
the nylon cutting line, tap the spool button lightly on ground (while the unit is running).
These operations should be repeated a few times before starting work to make sure that
everything is functioning properly and to familiarize you with the grass trimmer. Start off slowly,
when you have gained experience, you will be able to use the grass trimmer to its full potential.