CHALLENGE 18V Li-ion Pole Cordless Hedge Trimmer Original Manual M0E-9ET-410 Important - Please read these instructions fully before starting assembly and using. These instructions contain important information that will help you get the best from your pole hedge trimmer, ensuring it is assembled correctly and safely. If you need help or have damaged or missing parts, call the Customer Helpline on 01904 727508 prior to returning product to store.
Contents Introduction .......................................................................................................................................................3 Safety Information..............................................................................................................................................3 Parts list..............................................................................................................................................................
Introduction Thank you for purchasing a CHALLENGE pole hedge trimmer. We hope you are completely satisfied with your new product and hope you will enjoy using this tool for many years. Your M0E-9ET-410 pole Hedge Trimmer has been designed for trimming light foliage and is intend for DIY use only. Intended Use This Li-ion hedge trimmer M0E-9ET-410 is intended for trimming hedges, bushes and shrubs. Observe the technical data for the maximum cutting capacity.
Safety Information Important - Please read these instructions fully before starting assembly General Power Tool Safety Warnings 8. Head protection. Always use safety glasses and gloves. Use a face or dust mask whenever the operations may produce dust or flying particles. Wear ear protection whenever the sound level seems uncomfortable. 9. Do not overreach. Keep proper footing and balance at all times. 10. Stay alert, watch what you are doing. Use common sense when operating the appliance.
Safety Information Additional safety instructions for batteries and chargers Batteries WARNING! Do not use any attachments or accessories not recommended by the manufacturer of this tool. The use of attachments or accessories not recommended can result in serious personal injury. 1. Never attempt to open for any reason. 2. Do not expose to water. 3. Do not incinerate the battery pack even if it is severely damaged or is completely worn out. The battery pack can explode in a fire. 4.
Safety Information Chargers 1. The charger’s plug must match the outlet. Never modify the plug in any way. Unmodified plug sand matching outlets will reduce risk of electric shock. 2. Use your charger only to charge batteries of the type supplied with your tool. Other batteries could burst, causing personal injury and damage. 3.
Safety Information Additional safety instructions for hedge trimmers 8. Remove the battery before checking, maintenance or working on the tool. 9. While operating the tool always be sure of a safe and secure operating position especially when using steps or a ladder. 10. Do not attempt to repair the tool. 11. Do not operate the tool with a damaged or excessively worn cutting device. 12. Always wear ear protection, goggles and a helmet during operating. 13.
Safety Information Emergency Familiarize yourself with the use of this product by means of this instruction manual. Memorize the safety directions and follow them to the letter. This will help to prevent risks and hazards. 1. Always be alert when using this product, so that you can recognize and handle risks early. Fast intervention can prevent serious injury and damage to property. 2. Switch off and take the battery pack off if there is any malfunction.
Safety Information Warning Symbols Symbols are used in this manual to attract your attention to possible risks. The safety symbols and the explications which accompany them must be perfectly understood. The warning themselves do not prevent the risks and cannot be a substitute for proper methods of avoiding accidents. Warning! Conform to all relevant safety standards. Read the instruction manual before use. Wear ear protection. Wear eye protection. Wear protective, slip-resistant footwear.
Safety Information Warning Symbols Warning symbols on the charger Before use, carefully read through the user manual. The charger is for indoor use only. Protection class II. Pole orientation. Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice. Warning Symbols on the Battery Do not dispose of batteries in rivers or immerse in water. o max.
Parts list Parts description 1 Working head 2 Pole tube 3 Blade cove 4 Blade 5 Main switch 6 Battery pack 7 Charger 8 Charging station 9 LED light Shoulder strap 12 Connecting knob 10 11 Safety lock-off button 4 1 2 3 10 12 11 7 8 5 9 6 Customer Helpline 01904 727508 www.coreservice.co.
Assembly Preparing to assemble the pole hedge trimmer NOTE: Before assembling the tool, read the instruction book carefully. Charging the battery WARNING! The charger and battery pack are specifically designed to work together so do not attempt to use any other devices. Never insert or allow metallic objects into your charger or battery pack connections because an electrical failure and hazard will occur.
Assembly Charging procedure Important charging notes Longest life and best performance can be obtained if the battery pack is charged when the air o temperature is between 18-24 C. Do not charge the battery pack in a very low or very high air temperature. This is important and will prevent serious damage to the battery pack. 1. When using your tool continuously, the batteries in your battery pack will become hot.
Assembly Install the battery pack Warning! Always release the On/Off switch before insert in or removal of the battery pack. Remove the battery pack. Depress the button (A) on end of the battery pack, and then remove the pack from the tool. Install the battery pack. Align the ribs on both side of the battery pack with the slots in the housing and slip it into place. Always insert it all the way until it locks in place with a click sound.
Operation Switch ON/OFF WARNING! If any parts are missing, damaged or broken, do not operate your hedge trimmer until all damaged parts have been replaced or repaired. Failure to do so could result in serious personal injury. Switching the trimmer on: 1. Press and hold the safety lock-off button (A) and then press the start button (B) on the handle. 2. Release the safety lock-off button (A) again. Switching the trimmer off: 1. Release the start button (B) on the handle.
Operation Function of swivel head Note: The cutter head can be locked in five positions(-45°, -22.5°,0°, 22.5°, 45°, 67.5°). Hold the handle (D) tightly. Push the lock button (E) and then turn the cutter head (F) to the desired position. Release the lock button (E) again and check whether the cutter head is locked in place. D E F 45o Using the hedge trimmer WARNING! Remove the cut branches. DO NOT exceed the cutting capacity of this product.
Maintenance and storage Maintenance WARNING! Before any maintenance, always take off the battery pack and wear protection gloves. Lubrication of the blade For easier operation and longer life, lubricate the cutting blades before and after each use. Before lubricating, make sure your hedge trimmer is disconnected from the battery. Apply the oil (any kind of lubrication oil) so that it runs between the two blades.
Troubleshooting Troubleshooting Although your new cordless hedge trimmer is really easy to operate, if you do experience problems, check the following: If trimmer will not operate Check battery pack assembly; Charge the battery: operation of the hedge trimmer is dependent upon sufficient charge in the battery pack. If the battery will not charge Check to see if the battery is properly inserted into the charging station, and make sure the indicator light is on. If not, check the power supply to the socket.
Technical data Technical Data Table Model M0E-9ET-410 Voltage 18V DC Battery type Lithium-Ion No load speed 1400/min Cutting length/capacity 410mm/14mm Battery pack Model ET-D1806 Battery type Lithium-Ion Battery capacity 1.5Ah Charging time Approx.
Technical data Noise and vibration data protection measures are necessary! The declared vibration value has been measured in accordance with a standard test method (according to EN 60745-1) and may be used for comparing one product with another. The declared vibration value may also be used in a preliminary assessment of exposure. This tool may cause hand-arm vibration syndrome if its use is not adequately managed.
Guarantee Dear Customer, In the unlikely event that your device develops a fault, please contact our Customer service department on the telephone number shown below. 1. These guarantee terms cover additional guarantee rights and do not affect your statutory warranty rights. Claims must be accompanied by Proof of Purchase.
