Parts List
4
Customer Helpline 01904 727508
www.coreservice.co.uk
Safety Information
Important - Please read these instructions fully before starting assembly
8. Head protection. Always use safety glasses and gloves. Use a face or
dust mask whenever the operations may produce dust or ying particles.
Wear ear protection whenever the sound level seems uncomfortable.
9. Do not overreach. Keep proper footing and balance at all times.
10. Stay alert, watch what you are doing. Use common sense when
operating the appliance. Do not operate the tool when you are tired.
11. Grip the tool securely. Operator should have one hand on the main
handle, the other on the front handle. Keep nger off trigger until ready to
use.
12. Remove adjusting keys and wrenches. Always check that adjusting
keys and wrenches are removed from the tool before operating the
tool.
13. Risk of cut. Do not try to grasp or remove trimmings when the
product is running. Only remove trimmings when the product is switched
off and disconnected from the power supply.
14. Disconnect the battery. Disconnect battery from the tool when not in use
or when servicing or cleaning.
15. Check for damaged parts. Before further use, carefully check the tool
for damage.Check for alignment of moving parts, binding of moving parts,
breakage of parts, mounting and any other condition that may affect its
operation. Do not use the tool if any parts are damaged or defective. Have
any damaged or defective parts repaired or replaced by an authorized
service agent. Never attempt any repairs yourself.
16. Store idle tools. When not in use, tools should be stored in a dry, locked-
up place out of reach of children.
17. Maintain tools with care. Keep tools clean and in good condition for
better and safer performance. Follow the instructions for maintenance and
changing accessories. Keep handles and switches dry, clean and free
from oil and grease.
18. Have your tool repaired by an authorized service agent. This tool
is manufactured in accordance with the relevant safety regulations. To
avoid danger, electrical appliances must only be repaired by qualied
technicians.
General Power Tool Safety Warnings