Safety Information
Important - Please read these instructions fully before starting assembly
8 Customer Helpline 0343 515 1906
• Before you start up the shredder, check that all of the
nuts, bolts and other fastenings are tight. Covers and
shields must be fastened properly and in good working
order. Replace any damaged or illegible stickers.
• Only use replacement parts and accessories supplied
and recommended by the manufacturer. Using third-
party parts will immediately invalidate the guarantee.
• Do not leave the shredder working unattended and keep
it in a dry place out of children’s reach.
• While being used in the open, connect the shredder to a
residual current (RC) circuit breaker with a trip current of
not more than 30 mA.
• When servicing the cutting means be aware that,
even though the power source will not start due to the
interlock feature of the guard, the cutting means can still
be moved by a manual starting mechanism.
• Shut-off the power unit before attaching or removing the
bag.
• Keep all guards and deectors in place and in good
working condition.
Working with the device
• Make sure that the funnel feeder is empty before you
start the shredder.
• Keep your head, hair and body away from the intake
opening.
• Do not reach into the funnel feeder during operation. The
shredder will continue to run for a short period after you
switch it off.
• Always make sure you are standing in a rm, balanced
General Safety (continued)
Safety Information