Assembly Instructions

20
Customer Helpline 0343 515 1906
Blade Maintenance (continued)
Carbon Brushes
Maintenance and Storage
Maintenance
If the blade is blunt, it can be sharpened in a specialised workshop. If the blade is damaged or
showing signs of imbalance, it must be replaced.
Carry out the following steps to change the blade:
• Undo the fastening bolt (Fig. 6).
• Remove the blade and replace with a new one.
• When tting the blade, make sure it is installed in the right direction. The wings on the blade must
be on the top (nearest to the deck).
• Then retighten the fastening bolt. The tightening torque should be approx 25 Nm.
IMPORTANT! Always wear work gloves when engaging in any maintenance work.
Only replace the blade with a genuine replacement blade as this will ensure top performance and
safety under all conditions.
In case of excessive sparking, have the carbon brushes checked only by a qualied electrician.
Important! Carbon brushes should only be replaced by a qualied electrician.
• There are no parts inside the mower which require additional maintenance.
• Store in a dry place, out of reach of children.