Assembly Instructions

15
Customer Helpline 0343 515 1906
3a. Align the fronts end of the top half and the bottom half of the grass box. Clip the two halves
together starting at the front.
3b. Once the front clips on either side are secure, work back on either side to secure each clip . This
method will help to keep the two halves of the box aligned.
3c. Fit the handle
10
into the top of the grass box.
3d. Before you t the grass box onto the mower you must ensure that the motor is switched off and
the blade is not rotating. The grass box must be attached to the two hooks
A
on the mower.
Open the safety guard
9
with one hand and attach the grass box with the other hand as shown
in Fig. 3d. The safety guard is held against the grass box by a spring.
ATTENTION! Never operate the mower unless the dsafety guard and grass collector are fully installed.
Risk of injury!
Step 2 - Grass Collector Assembly (continued)
Assembly