Assembly Instructions

13
Customer Helpline 0343 515 1906
2a-2b. Fit a bottom handle into the opening provided for it and secure it as shown in
Fig. 2b with a screw
7
. Proceed in the same way on the other side.
2c. When you t the upper push handle you can decide the height of the push handle by selecting
the appropriate fastening hole. Fasten the upper push handle using either the holes
L
for a low
position or
H
for a high position.
2d. Fasten the upper push handle to the bottom handle support as shown in Fig. 2d.
Step 1 - Handle Assembly
Assembly
2a
2c 2d
2b
5
L
H
7
4