Assembly Instructions

19
Customer Helpline 0343 515 1906
Mowing Advice
Operating Instructions & Tips
Cut your grass twice a week during the growing season,your lawn will suffer if more than a third of its
length is cut at one time.
Keep the under side of the mower casing clean and remove all grass deposits from it. Deposits make it
more difcult to start the mower and also adversely affect the mowing quality and the grass collection.
Switch off the motor before you carry out any inspections of the cutting head. Remember that the
cutting head will continue to turn for a few seconds after the motor has been switched off. Never
attempt to stop the cutting head.
The cutting system must be kept in good condition and inspected before and after use. Switch off the
motor before you carry out any inspections of the cutting system. Remember that the cutting head
will continue to turn for a few seconds after the motor has been switched off. Never attempt to stop
the cutting head.
Check plastic cutters for wear and replace when necessary. Plastic cutters should be straight, replace
if bent or twisted.
Place the mains lead in loops on the ground near the wall socket. Mow away from the socket and
cable and ensure that the mains lead is always on the section of lawn that you have already mowed so
that you do not run over the mains lead with the mower.