Assembly Instructions

Important - Please read these instructions fully before starting assembly
9
Customer Helpline 0343 515 1906
• When the mower is running ensure that no person or
pet, particularly children and animals, is in the immediate
vicinity of the hover mower. Ensure that you keep
everybody at least 10meters away from the mower when
it is working.
• Switch off the motor and disconnect the plug from
the power supply if the mower strikes a foreign body.
Check the mower for signs of damage and carry out all
necessary repair work before you start the mower again.
• If the hover mower begins to vibrate abnormally, switch
it off immediately, disconnect the plug immediately and
check it carefully. Ensure that all the nuts, bolts and
screws are tight and that the mower is in a safe condition
for use.
• Do not leave the mower out in the rain. The lawn must
not be wet or very damp.
• Only push the mower at a normal walking pace.
• Be particularly careful when you change the direction of
the mower or pull it towards you. Avoid pulling it towards
you while the blade is moving.
• Never run or attempt to push the mower over any areas
except your lawn or other grassed areas. Carefully
actuate the starter switch in accordance with the
instructions. (See Operating Instructions)
• Do not switch the mower on and off frequently over a
short period of time, and in particular do not play with
the ON/OFF switch.
• Do not touch the cutting head until the machine has
been disconnected from the mains and the cutting blade
has reached a complete standstill.
• Never lift or carry the mower whilst the motor is running.
Personal Safety (continued)
Safety Information