Assembly Instructions

Important - Please read these instructions fully before starting assembly

Customer Helpline 0343 515 1906

• Switch off the motor and disconnect the mains lead

before cleaning the cutting head and the fan and before

you inspect it if the mower has struck a foreign body.

• Check the site on which you intend to use the hover

mower and remove all objects that may be caught

or thrown up by the mower. Foreign bodies must be

removed before you start mowing. Keep an eye of the

power cable and keep it away from the cutting blade at

all times.

• Ensure that you do not push the mower over areas that

might damage or snare the power cable.

• Before you lift the hover mower to transport it, switch off

the motor, disconnect the mains lead and wait until the

cutting head has come to a complete standstill. Ensure

the cutting head is facing away from you.

• Never reach towards rotating parts with your hands or

feet.

• The safety distance from the moving blade produced by

the push handle must be maintained at all times.

• If you use the mower on a small incline, mow across the

slope (not in an up and down direction). Always be sure

of your footing on slopes.

• Be particularly careful when changing direction with the

mower whilst working on a slope.

• Do not use the lawn mower on gradients of over 15

degrees.

• Ensure that you have safe footing at all times whilst

working with the mower.

• Always wear strong, anti-slip footwear and long trousers

when using the mower. Never mow in bare feet or in

open-toed sandals.

Personal Safety (continued)

Safety Information