Instruction Manual
KNOWING YOUR MACHINE
1. Guard
2. Fan Blade
3. Speed control panel
4. Handle
5. Stand
6. Foot
Operating Instruction
1. Remove the fan from its carton and unwind the cord to its full length. Set the appliance on a dry, level and sturdy
surface.
2. Plug the appliance into a 230V ~ 50 Hz electric outlet. Ensure the power switch is at “0” position.
ON / OFF, Speed selection
1. The fan is controlled by the selector on the speed control panel at the back of the fan.
2. To turn the fan on, turn the switch to either “I” or “II” position.
3. To change the speed of the fan by turning the switch to another position, i.e. “I” is low & “II” is high.
4. The fan can be turned off by turning the switch to “0” position.
Tilt adjustment
1. Adjust the angle of the main body by holding the grille.
2. Do not let your finger go into the grille. This is danger and may cause Hazard.