User's Instructions

Assembly Instructions
Step 11 - Assemble the
Enclosure
Insert the assembled Flate
Steel Plate into the sleeve at
the top of the enclosure
netting (# G) as shown in
FIGURE 11-1.
With two people firmly holding
the ends, push the assembled
steel plates inward to form a
circle.
Connect the two ends with Flat
Steel Socket (# C2) and
securely tighten using
Self-Locking Screw (# H) and
Cap Nut (# I) as shown in
FIGURE 11-2.
Please make sure to securely
fasten the plates together
using Wrench. Failing to do so
may increase the chance of
injury due to the enclosure
frame snapping apart during
assembly or trampoline use.
CAUTION:
THREE ADULTS
ARE RECOMMENDED
WARNING
FIGURE 11-2
FIGURE 11-1
G
C1
C2
G
#14
#H
#I
#D
C1 C1C2
G
21 22 23 24 25 26 27