User's Instructions

Assembly Instructions
Step 4 – Spring assembly
There are a total of 36 springs.
For even distribution of spring
tension and ease of assembly,
the springs must always be
installed on opposite sides of
the mat in an alternating
manner, i.e. 1, then 19,
followed by 10 and 28 as
shown in FIGURE 4.
Hint:
The number of triangle-rings
sewn onto the mat is equal to
the number of holes on the
frame. If you notice that you
have miscounted a hole or
triangle-ring, remove and
reinstall the springs as
necessary while maintaining an
even distribution of tension as
explained above.
Heavy gloves must be used to
protect your hands from pinch
points during assembly and
goggles must be worn to avoid
injuries to the eyes
WARNING
FIGURE 4
#13
1
#11
1
10
28
19
1
14 15 16 17 18 19 20