User's Instructions

Assembly Instructions
Step 1 – Frame assembly
There are a total of 15 pieces
of steel tubing parts required to
assemble the trampoline
frame.
Lay out all parts in a circle as
shown in FIGURE 1. You
should have the following
parts:
6 - T-Part with Leg Sockets (# 3)
6 - Top Rail (# 4)
3 - Leg Base (# 5)
Please ensure proper
placement of this product to
avoid injuries. It is essential
that the intended site for this
trampoline is completely flat
and level. If the ground is
uneven, this could cause
movement in the frame and
stress on the joined sections of
the frame that could damage
the trampoline and/or can
cause serious injury. Do not
position this trampoline on
hard surface such as concrete,
tarmac or paving. Suitable
surfaces include flat dirt or
grass, sand or play area
covered with an appropriate
depth of play bark material,
with no obstructions above,
below or near the product.
WARNING
FIGURE 1
5
5
5
4
4
44
4
4
3
3
3
3
3
3
7 8 9 10 11 12 13