User's Instructions

4
Step 1
a: Select area.
Lay the frame out on the
floor - refer to parts list.
Critical: Check square
holes and round holes are
positioned as shown.
Step 2
Assembly Instructions
Step 6
Assembly Instructions
TOP VIEW
NOTE: It is advised that
2 people perform the
following steps.
6.1
Turn the trampoline
over so that the handle
section is flat on the floor.
Place your foot onto the
handle section to anchor
the trampoline at this stage.
6.2 / 6.3
Place your hands on
the frame as shown in the
diagram, pull the frame
leg (2B) over the partly
formed leg (3C) and slot
into place.
Warning: Ensure that you
place your hands as shown
in the diagrams (6.2 & 6.3).
Misplacement could lead to
pinching of the hands or
fingers.
6.1
6.2
6.3
4D
5E
1A
3C
3C
2B
a: Assembly.
1. Ensure mat is facing
upwards with padded
section on top and the
front closure sections are
at the handle end.
2. Insert the frame legs
through the stretch tech
elastic loops. Ensure the
legs are inserted as
shown. (Diagram shows
a top view with frame legs
curving away from the
mat).
Note:
Frame assembly images
on page 4/5/6/7 and
page 8 show the frame
without cover to aid easy
frame assembly. Cover
is permanently attached
to mat. Never attempt
to remove cover.
(2B)
(3C)
a:
a:
Front
Back
Front
Front
TOP VIEW
7