User's Instructions

ManualsBrandsChad Valley ManualsLarge play equipmentKids Garden Swing - Blue

Single Swing

Assembly & User Instructions -

Please keep for future reference

367/3568

Important -

Please read these instructions fully before assembly or use.

These instructions contain important information which will help you get the best from your

product and ensure safe and correct assembly, use and maintenance.

Important

Maximum user

weight: 45kg

Age: 3 - 8 years

If you need he

lp or have damaged or missing parts, call the

Customer Helpline: (+44) 0330 0904 420

Tips: It will take 2 adults

around 30 minutes to

assemble.

Summary of content (10 pages)

PAGE 1
Single Swing Assembly & User Instructions - Please keep for future reference Important Age: 3 - 8 years Maximum user weight: 45kg 367/3568 Tips: It will take 2 adults around 30 minutes to assemble. Important - Please read these instructions fully before assembly or use. These instructions contain important information which will help you get the best from your product and ensure safe and correct assembly, use and maintenance.
PAGE 2
Contents Warnings 2 Parts 3 Assembly Instructions Care and Maintenance 1 4-8 9
PAGE 3
Warnings Important –Please read these instructions fully before assembly or use. WARNING ● WARNING! Not suitable for children under the age of 36 months because of small part(s) and long cord(s) – choking and entanglement/ strangulation hazards. ● Suitable for children aged 3-8 years. ● Only one child per seat at any one time. ● For outdoor use. ● Check all nuts, bolts and ﬁttings for tightness and tighten if required.
PAGE 4
Parts If you have damaged or missing parts, call the Customer Helpline: (+44) 0330 0904 420 Please Check you have all the parts ﬁttings listed below 1 Beamx1pc 5 Railx2pcs 2 Legx2pcs 6 Seatx1pc 3 Legx2pcs 7 Anchorx4pcs 8 Plastic Cap x 4pcs 4 Legx4pcs A B C ×2 ( M8 ) x4(M6x42mm) x4(M6x53mm) E G H ×16 ( Ø14×Ø6.5mm) ×4 (Ø13.5×Ø8.5mm) ×8 (Ø10×Ø6.5mm) J Z W ×8 ( M6 ) ×1 (4 mm) ×1(10 & 13 mm) D ×8 ( Ø19×Ø8.
PAGE 5
Assembly Instructions Step 1 Insert Leg(2) and Leg (3) into beam(1) as shown in Figure 1. Attach the swing seat (6) to beam (1) using U bolt(A). I G D X2 Note the position of the Legs need to be inversed on the two sides of the swing frame.
PAGE 6
Assembly Instructions Step 2 1 Insert Legs (4) into legs (2) and (3) and secure together with Rail (5) as shown in figure 2. 2 3 3 2 5 5 Note: -Plastic cap (8) needs to be inserted into rail (5) before securing the bolt. -Rail (5) needs to be attached to the outer sides of the swing frame.
PAGE 7
Assembly Instructions Step 3 Attach anchors (7) to the base of Legs (4). Repeat this step for the other remainder anchors. 4 TIP: AFTER FINISHING ALL STEPS ABOVE, GO OVER THE ENTIRE UNIT AND TIGHTEN ALL BOLTS.
PAGE 8
Assembly Instructions Step 4 Anchor the swing in the ground. By following the previous steps, your single swing should look as shown in the ﬁgure 4.
PAGE 9
Assembly Instructions SEAT ADJUSTABLE GUIDE THE LENGTH OF THE ROPE IS ADJUSTABLE FOR THE HEIGHT OF THE CHILD THROUGH THE SEAT CONNECTOR. TO ADJUST, LOOSEN THE KNOT ON THE SEAT CONNECTOR, PULL ROPE THROUGH THE HOLES AND TIGHTEN AGAIN. MAKE SURE THAT THE KNOTS ARE TIGHT AND THAT BOTH ROPES ARE ADJUSTED SO THAT THE SEAT IS HORIZONTAL. IMPORTANT: MINIMUM CLEARANCE BETWEEN THE FOOTREST/SEAT AND THE GROUND SHOULD BE 35 CM.
PAGE 10
Care and Maintenance General This Single Swing was designed and manufactured with quality materials and craftsmanship. If correct care and maintenance is taken, it will provide users with longer usage for exercise, fun and enjoyment. Inspect regularly for: • C H E C K A L L N U T S A N D B O LT S T W I C E MONTHLY DURING THE USAGE SEASON FOR TIGHTNESS AND TIGHTEN AS REQUIRED. IT IS PARTICULARLY IMPORTANT THAT THIS PROCEDURE BE FOLLOWED AT THE BEGINNING OF EACH SEASON.