Assembly Instructions

Step 1

Inflate The 3 Ring Pool

Note: If the valve cannot

be recessed into the unit,

it may be the indication of

over inflation.

Pinch valve at its base

with fingers, insert

pressure plug into

opening and pump air in.

Seal the valve with valve

lid and press the valve

into the unit to get a flat

surface. Do not over

inflate or use high

-pressure to inflate this

product.

Not suitable for children under 3 years

due to small parts, choking hazard.

Produced for Chad Vallley

Toys

. Argos Ltd. Country of origin: CHINA

Address: 489-499 Avebury Boulevard, Central Milton Keynes, MK9 2NW.

www.argos.co.uk/chadvalley

If you need help or have damaged or missing parts, call the Customer Helpline: 0345 640 0800.

132726946

365/3409

PAGE 1
Assembly Instructions Step 1 Inflate The 3 Ring Pool 132726946 365/3409 Note: If the valve cannot be recessed into the unit, it may be the indication of over inflation. Pinch valve at its base with fingers, insert pressure plug into opening and pump air in. Seal the valve with valve lid and press the valve into the unit to get a flat surface. Do not over inflate or use high -pressure to inflate this product. Not suitable for children under 3 years due to small parts, choking hazard.
PAGE 2
Safety Information Parts Important – Please read these instructions fully before assembly or use WARNING 1. Keep the assembly and installation instructions for further reference. 2. Keep out of baby’s reach. 3. Not suitable for children under 36 months - small parts, Choking hazard. 4. The product is not a life-saving device. 5. Do not leave child unattended while device is in use. 6. The product must be assembled/disassembled by adult. 7. Area of placement must be flat and even and free of sharp. 8.