User's Instructions

P-S-004991
INSTALLATION INSTRUCTIONS
DISASSEMBLY AND CLEAN
MAINTENANCE
REPAIR
STORAGE
Installation of POOL usually takes only 10 minutes with 1 people.
1. Find solid, level ground and clear it of debris.
ATTENTION: Do not set up the pool under cables or under trees.
2. Take the pool out of package with care.
3. Spread out the pool and make sure the pool is right side up.
4. Open the valves and inflate with an air pump (pump is not included in this product), close the valves after inflation.（
For inflatable pool only）
ATTENTION: Do not over inflate.
5. Begin to fill, once pool floor is slightly covered, smooth all wrinkles. Start at the center of pool and move to the
outside.
6. Continue to fill the pool until the water capacity reaches 75%. Please kindly pay the utmost attention not to over fill
the pool for security reasons.
WARNING: Do not leave pool unattended while filling with water.
7. Children can drown in very small amounts of water. Empty the pool when not in use.
8. Do not install the mini pool over concrete, asphalt or any other hard surface.
9. It is recommended to place the mini pool on a level surface at least 2 m from any structure or obstruction such as a
fence, garage, house, overhanging branches, laundry lines or electrical wires.
Warning: If you do not adhere to the maintenance guidelines covered herein, your health might be at risk, especially
that of your children.
1. Replace the pool water regularly; unclean water is harmful to user’s health.
2. Please contact your local retailer to obtain chemicals to treat the water in your pool. Be sure to follow the chemical
manufacture’s instructions.
3. Proper maintenance can maximize life of your pool.
4. See packaging for water capacity.
5. You may also purchase maintenance kit (including pool skimmer and pool vacuum), chemical floater and pool cover
from your local poor retailers to help keeping pool water clean.
If a chamber is damaged, use the provided repair patch.
1. Completely deflate the product.
2. Clean and dry the damaged area.
3. Apply the provided repair patch and smooth out any air bubbles.
1. Make sure all water is drained from the pool. Once pool is completely dry, put the folded pool into the package.
2. Store in a cool, dry place and out of children’s reach.
3. We strongly recommend the pool is disassembled during the off season (winter months).
1. Check local regulations for specific directions regarding disposal of swimming pool water.
2. Drain the pool. ATTENTION: Do not leave the drained pool outside.
3. Open the valve to deflate.
4. After deflation, use a damp cloth to clean.
P-S-004991/14.8x21cm/15446/18N-OEM-C16/JS-YF-2017-B-01602
If you need help or have damaged or missing
parts, call the Customer Helpline: 0345 6400 800.