Assembly Instructions

Step 1

Inflate The Crab Baby

Pool

Note: If the valve cannot

be recessed into the unit,

it may be the indication of

over inflation.

Pinch valve at its base

with fingers, insert

pressure plug into

opening and pump air in.

Seal the valve with valve

lid and press the valve

into the unit to get a flat

surface. Do not over

inflate or use high

-pressure to inflate this

product.

Produced for Chad Vallley Toys. Argos Ltd. Country of origin: CHINA

Address: 489-499 Avebury Boulevard, Central Milton Keynes, MK9 2NW.

If you need help or have damaged or missing parts, call the Customer Helpline: 0345 640 0800.

Age: 1 year +

132724086

152/9999

PAGE 1
Assembly Instructions Step 1 152/9999 132724086 Inflate The Crab Baby Pool Note: If the valve cannot be recessed into the unit, it may be the indication of over inflation. Pinch valve at its base with fingers, insert pressure plug into opening and pump air in. Seal the valve with valve lid and press the valve into the unit to get a flat surface. Do not over inflate or use high -pressure to inflate this product. Age: 1 year + Produced for Chad Vallley Toys. Argos Ltd.
PAGE 2
Parts Safety Information Please check to make sure that you have all the parts and fittings listed below: Important – Please read these instructions fully before assembly or use WARNING 1. Keep the assembly and installation instructions for further reference. 2. Keep out of baby’s reach. 3. The product is not a life-saving device. 4. Do not leave child unattended while device is in use. 5. The product must be assembled/disassembled by adult. 6. Area of placement must be flat and even and free of sharp.