Quick user guide (réf.
Download the app « mobile eye door +» How to SETUP, for the first time, your Chacon IP VDP Connect the RED and Black cables of the indoor unit to the outside unit. Then connect, to POWER, your IP VDP. Wait for around 1 minute until you here a BIP to start RESET or using the VDP.
Start to do RESET to the IP VDP Chacon to start setup: I. Press the “Call” button, in the outside unit, for around 5 seconds until you hear a short BIP. Do this step 3 times. II. Now wait for around 30 seconds until the unit reboots. III. The Outside unit will start a constant BIP. This means that you are in SETUP mode for the mobile APP. Open the software and it will appear a “Help” guide with the functions of the software.
Back to the application. Press the button to add the videophone. Then select «add a device that is connected to the internet», and then «scan QR Code». Scan the QR code on the back of the unit. Change the device name (the name may not contain spaces) and, if you wish, the user name and password (the default password is 888888). Select «Done» in the upper right-hand corner of the screen. To connect your videophone to the internet, press the icon, and then and finally the «device list» option .
For iOs : Also you have activate the notifications in your “Settings”, “Notification Center” for the “Mobile Eye Door+” APP For Android : Activate notification in the app. Press the IP VDP button and then the number of your entry, “1”, to view whenever you want. For all other mobile equipment’s, that you want to add your IP VDP, please press the “+” button and select the option “Add a device that is connected to the internet”.
vostro contributo alla salvaguardia dell'ambiente! FCC Compliance Statement: This device complies with Part 15 of the FCC rules. Operation is subjected to the following two conditions: (1)this device may not cause harmful interference, and (2) this device must accept any interferencereceived, including interference that may cause undesired operation.
