Product data

29707023-003
3. Line Options
A Line Options panel is displayed for each communication board assigned on the Product
Description panel. Each board supports different protocols. During configuration, you select
the protocol for each line on a particular board. The board types and the protocols they support
are listed below:
• ESC - ESCON/SNA, ESCON/CTC, and ESCON/Non-SNA
• CHP - Channel/SNA, Channel/CTC, and Channel/Non-SNA
• FET - LLC, TCP/IP, IPX, IP/Bridge, LAT or Coax Ethernet Bridge
• ETH - LLC, TCP/IP, IPX, IP/Bridge, LAT or Coax Ethernet Bridge
• HSC - SDLC, SDLC/DAP, Frame Relay, X.25
• SCC - SDLC, SDLC/DAP, BSC, X.25
• TRC - LLC, TCP/IP or IPX
As you define lines, keep in mind that there are Maximum Connection Limitations for LINCS.
If the number of assigned communication boards is decreased in Product Description, then
the last line previously assigned for that board type is deleted. You must update all other
panels that reference the deleted line.
Maximum Connection Limitations
While defining Line Options, you should keep the following connection limitations in mind.
A warning message will be displayed if these limitations are exceeded.
Max Connections Per Board Type
EPYTNOITCENNOCCSEXSEPHCTEFHTECSHCCSCRT
xaM
latoT
stiucriCyawetaG
otULgnidulcni(
)deppamUP
652652652052052052)1(0410524201
stiucriCtsoH6146616161616161)4(821/61
stiucriCNPPA6526526520520520520 0524201
tsoHTENLET&TAL
snoitcennoC
ANANAN)3(652)3(821ANAN)3(8216
52
DPL;revreStnirPPCT
snoitcennoC
ANANAN)3(23)3(23ANAN)3(23652
seciveDkrowteN
/SYSNAL/TENLET/TAL(
)sretnirPPCT/RPL
ANANAN82123ANAN23652
troppuStneilC0723NTANANAN4201052ANAN0528404
snoitcennoClatoTxaM
draoBreP
652652652)2(4201)2(052052651)2(052
(1) A maximum of 16 DAP gateway circuits are supported by the SCC board. All 16 may be
configured on one line, or they can be distributed in any manner among both lines.