Product data

200
LINCS Configuration
707023-003
IPX
This field is set to 256K if more than one IPX protocol has been selected. Multiple MAC
Frame Formats can be selected on one line, or more than one line can have IPX enabled.
Central Site Customization Memory Requirements
This is a protected field. 512KB of memory is required if Central Site Customization is enabled
on the General Options panel.
Local Format Storage Memory Needs
This is a protected field which represents the amount of feature memory which is set aside for
loading formats. It is calculated by adding up the amount of Local Format Storage Memory
(LFS) set aside for each 3270 Host Circuit which is configured for LFS. In addition, some
overhead feature memory is added in, depending upon the configured amount for each host.
The table below indicates how much system overhead is required for each host configured for
LFS.
derugifnocyromemSFL
tsohelgnisarof
yromeMerutaeFehtnonideddadaehrevO
lenapnoitacollA
K23K4
K46K6
K821K01
K652=<K
81
Refer to the Local Format Storage field on the 3270 Host Profiles panel for more details on
LFS memory requirements for a single host.
Record Playback
This is a protected field. The memory requirements are determined based on the following
formula.
drocerotdelbanesecivedrebmun
)K1+secneuqeSeciveDfohtgnel(*
K4/1*secivedrebmunlatot+
42*)K(ezisecneuqesla
bolgxam+
K61+
Session Management Feature Memory Requirements
The Session Management System (SMS) feature requires 64K of feature memory.
Attached Processor
This is a protected field which indicates the amount of feature memory required when the
Attached Processor Feature is enabled on the RPQ panel. The AP Feature allows an application
program running on an AP (an asychronous host connected to an AT&T 6544 Controller) to
control synchronous and asynchronous windows of AT&T’s 6538 and 6539 displays. For
more information, refer to the 6544 Controller AP Feature Technical Reference manual.