Product data

148
LINCS Configuration
707023-003
Break Time
LINCS sends a spacing character at the interval specified here. The value ranges from 50 to
500 milliseconds in increments of 50, and the default is 300 msec.
For coax keyboards use the keyboard to send a spacing character:
• 88 key - Hold down the ALT key and press the Up Arrow Key
• 102, 104 and 102 key - Press PF5
Second ASCII Session Profile Screen
ASCII Session Profile 01 LINCS C8.2 Central Control
TELNET OPTIONS
Interrupt Process: 00 Abort Output: 00
Break Character: 00 Are You There: 00
Erase Character: 00 Erase Line: 00
Echo: Disable Binary: Disable
Timing Mark: Disable Status: Disable
Terminal Type: Disable End of Record: Disable
TCP Port: 00000 TCP Port Action: None
TN3270 Session: Enable TN3270E Support: Enable
ATTN Key: Telnet Break
SYSREQ Key: Telnet Interrupt Process
PF: 1-Menu 3-Def_Dflt 4-Add 5-Delete 7-Back 8-Forw 9-Default 10-Done
The second of the two ASCII Session Profile panels will only be displayed if there are outgoing
TELNET Host connections configured on one of the Line Options panels.
ASCII Session parameters will be saved through this utility only. Any modifications made
using the ASCII Setup utilities will be temporary and will not affect any saved parameters.
Interrupt Process
This field lets you define the ASCII character that will generate the Interrupt Process character
for TELNET.
The valid range is 00 to 31 decimal. 00 is the default and disables the option.
Abort Output
Defines the ASCII character that will generate the Abort Output Character for TELNET.
The valid range is 00 to 31 decimal. 00 is the default and disables the option.
Break Character
Defines the ASCII character that generates the Break Character for TELNET.
The valid range is 00 to 31 decimal. 00 is the default, and disables the option.