Product data

143
Chapter 8. ASCII Port Options
707023-003
ASCII Session Profile 01
ASCII Session Profile 01 LINCS C8.2 Central Control
Profile Name: ________
Answer Back Sequence: ________________________________
Disconnect Sequence: ________________________________
Terminal Emulation: DEC VT2xx Timer Disc: 0000
Translate Tables: Primary Bold: Normal
Character Set: NRC VT2xx Controls: 7 bit
Tab Motion: Direct Auto Wrap: Disable
Newline: Disable Cursor Keys: Normal
Keypad Mode: Numeric Numeric Keypad: Decimal
Cursor: Enable Margin Bell: Disable
Formfeed: Linefeed Column Change: Preserve
3101 Turnaround Char: CR 3101 CR Key: CR
3101 Scroll: Off
Break Time (msec): 300 Duplex: Full
PF: 1-Menu 3-Def_Dflt 4-Add 5-Delete 7-Back 8-Forw 9-Default 10-Done
Profile Name
This is the name used as the host identifier for the ASCII session when using this profile.
Answer Back Sequence
Type up to 30 characters that will be used as an answerback sequence for CTRL break.
The Answerback and Disconnect Rules follow:
• To generate control characters within the string, enter a two-character sequence like
those shown in the table Answerback and Disconnect Chars.
• The caret (^) initiates a control character sequence and the character immediately
following the caret defines the control character.
• If the ^ (caret) character is followed by a character not in the table, then the character is
copied to the ASCII string.
• Caret ^^ (caret) generates a single ^ (caret) character.
• Characters entered after ^ (caret) must be uppercase.
• A single ^ (caret) at the end of the string is converted intact.
Example: To put a carriage return/newline sequence in an ASCII disconnect string, type
^M^J (Control-M, Control-J) after the data that is to be transmitted to the host.
Note: ^ (caret) may appear as ¬ (logical not) on some 3270 displays.