Product data

140
LINCS Configuration
707023-003
Line Type
Check a line type value for each port:
• 3-wire - Data leads only.
• Direct - Use this setting if the port is attached to a null modem, (default).
• Switched - Use this setting if the port is attached to a standard telephone line through a
modem.
• Non-switched - Use this setting if the port is attached to a leased or privately owned line
through a modem.
Flow Control
Choose a flow control setting for each port:
• XON/XOFF - (default) This setting is required for SWITCHED lines. It may be used
for 3-WIRE lines, NON-SWITCHED lines, or DIRECT lines.
• NONE
• DTR/DSR - This setting may be used for NON-SWITCHED lines only.
• RTS/CTS - This setting may be used for DIRECT lines only.
Stop Bits
Check one of these stop bit settings for each port:
• 1 stop bit (default)
• 2 stop bits
• 1.5 stop bits
Data Bits & Parity
Unless you’ve chosen auto baud/auto parity (display station only), select one of these settings
for each port:
stib7ytirapoN
ytiraPnevEkcehcon-ytiraPnevE
ytiraPddOkcehcon-ytiraPddO
ytiraPkraM
ytiraPecapS
stib8ytirapoN
ytir
aPnevEkcehcon-ytiraPnevE
ytiraPddOkcehcon-ytiraPddO
If you chose auto baud/auto parity, do not select a data bits and parity option for this port. Any
choice you indicate is ignored by LINCS. 8 bits, no parity is the default.