Product data

87
Chapter 4. Link Profiles
707023-003
Throughput Class Negotiation
This field defines the throughput class that the X.25 protocol tries to negotiate when either
requesting a call or accepting an incoming call. This field has no meaning for a PVC or if
packet negotiation is not available for a SVC.
Toggle to select one of these values (bps):
57051
003006
00210042
)tluafed(00840069
0029100084
Transmit Window Size
Options are: 1, 2(default), 3, 4, 5, 6, 7
This field defines the maximum number of I-frames that this link can transmit before an
acknowledgment is required. This value is typically set to a value greater than the Receive
Window Size of the station acting as its session partner, may be set to equal to the Receive
Window Size, but should never be set to a value less than the Receive Window Size.
X.25 Incoming Call Options
ytilicaFeziStekcaPetaitogeNelbasiDelbanE
ytilicaFeziSwodniWetaitogeNelbasiDelbanE
ssalCtuphguorhTetaitogeNel
basiDelbanE
reifitnedInoitcennoCetadilaVelbasiDelbanE
sserddAETDtsoHetadilaVelbasiDelbanE
ytilicaFegrahCesrev
eRytilicaFtpeccAtoNoDegrahC-esreveRtpeccA
egrahC-esreveRoNtpeccAytilicaFninoitpOrehtiEtpeccA
X.25 Outgoing Call Options
ytilicaFeziStekcaPetaitogeNelbasiDelbanE
ytilicaFeziSwodniWetaitogeNelbasiDelbanE
ytilicaFssalCtuphguorhTelb
asiDelbanE
reifitnedInoitcennoCelbasiDelbanE
sserddAETDlacoLelbasiDelbanE
ytilicaFegrahCesreveR
edulcnItoNoD
yt
ilicaF
egrahC-esreveRtseuqeR
-esreveRoNtseuqeR
egrahC
APPN HPR
On all SNA Link Profiles, the APPN HPR option is available to be enabled or disabled. It
should only be enabled if APPN is to be used over this link, and High Performance Routing
will be used.