User`s manual

CGPrint User’s Manual 12
4.5. Change and charge the accumulator
4.5.1. Change the accumlator
(1) Remove the accumlator cover after the turn Off the
printer
(2) Insert the accumulator plug of the printer.
(3) Remove the accumlator cover.
4.5.2. State of accumulator
State of the accumulator signalizing the tree lamp on
the control panel. If lighting the green lamp accumlator
is ready, if lighting the yellow lamp the accumlator
medium and is lighting red lamp need the charging
period.
This lamp signalizing the charging period. If blinking the
green lamp printer is turn ON and making the normal
charge. If the rounding the tree lamp making the quick
charge.